Single Channel DC Electronic Load Programmable Power Supply Tester 200W KP182

  

Single Channel DC Electronic Load Programmable Power Supply tester 200W KP182 US. Single Channel DC Electronic Load Programmable Power Supply Tester 200W KP182. Single Channel DC Electronic Load Programmable Power Supply tester 200W PRO UPS. Load mode: low basic CC, CV, CW, CR four basic load modes, low input or reverse connection protection and alarm.

High precision, high stability: optimized heat dissipation structure, high power density and digital control mode, high precision and good stability. Protection function: with over voltage, over current, power supply, over temperature protection function, low voltage remote measurement function. Auto test function: with external I / O trigger signal, PASS, FAIL command. Multi-function test function: low 10 KHZ dynamic test function; low battery capacity test function; low battery internal resistance test function; low overcurrent protection point/time test function; low fan PWM control, low power switch 110 VAC use. Voltage: AC 110V ± 10%, 50 ± 2Hz.

Load voltage: DC 1 -150 V. Communication method: communication is not supported. Overvoltage (OV): greater than 152 V off load.

Over temperature (OT): 85 ° C. Over power (OP): single channel 210W.

Power input fuse: 0.5A. Ambient humidity range: 1090% RH. DC input terminal to chassis withstand voltage: ±500VDC. DC input to chassis insulation resistance: >20M?

AC input to chassis insulation resistance: >20M? Dimensions (mm) L × B × H: about 300 × 90 × 190.

Feedback is very important to us. It is impossible to address issues if we do not know about them!

Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.

Do not send to the Canary Islands.