High Voltage Power Supply AC 90230V input 20KV 0.5mA Low Cost High efficiency

  
Linear modulation of output voltage. Digital display for output voltage. Connect AC 90230V input, and then power on. When the potentiometer is in "0", open the high voltage switch, and then adjust the potentiometer clockwise. Observe the digital display readings, and high voltage power supply output voltage = the reading × 100V.

When the required voltage is achieved, then rotate the potentiometer lock clockwise to lock the potentiometer. This prevents the output voltage changes caused by rotating the potentiometer by accident. High voltage connection wire is used for high voltage output.

High voltage power supply must be connected to ground reliably. Do not touch the high voltage wire, unless the high voltage power supply is powered off, and the load and internal capacitors are fully discharged.

When the high voltage power supply is powered off, wait for another 5 minutes for fully discharging all the capacitors inside the power supply. Do not operate the power supply in humid environment, and do not connect the operator to ground. The internal protection circuit is provided in the high voltage power supply, but the high voltage short circuit shall be avoided. Make sure the circuit is insulated perfectly, especially between the high voltage output and the surroundings so as to avoid electronic shock. = 25°C, unless otherwise noted.

IOUT = 0 0.5mA. Please feel free to send us messages, we are all ears. About this instrument: our company, Analog Technologies, Inc.

About us: Our company, Analog Technologies, Inc. R&D firm in January 7, 1997, in Novi, Michigan, a small town 25 miles from Detroit. After more than two decades of dedicated effort, we have established branches in San Jose, California, USA; Sydney, Australia; and Anshan, Liaoning, P. Our goal is to make our customers happy and grow our company to a bigger one.