Hifonics A3000.1D 3000W ALPHA Series Monoblock Amplifier

  

Product SKU: 178517 ID: a30001d. 3000 watt ALPHA Series Monoblock Amplifier. 3000W Hifonics ALPHA series Mono channel Super D-Classâ® car audio amplifier with electronic crossovers utilizing Ultra-Fi MOSFETS for high power and efficiency cooling with minimal distortion.

ALPHA car audio from Hifonics brought together the best design and engineering achievements from nearly 4 decades of driving the advancement of car audio. Technological advances like SUPER D-CLASSâ® and now FULL RANGE SUPER D-CLASSâ® have given ALPHA amplifiers maximum performance. The SUPER D-CLASS digital chip technology provides extremely efficient, low temperature, high system power in order to run cool from 4-Ohm to 1-Ohm. Directly wired into your source unit, this allows the amplifier to power up with your vehicle.

This is beneficial to more efficiently save battery life with auto shut off and power on. Hifonics Alpha Series A3000.1D. Super D-Class Fullrange Mono-Channel Amplifier.

4 ohms: 750 watts x 1 chan. 2 ohms: 1500 watts x 1 chan.

1 ohms: 3000 watts x 1 chan. Total power output: 3000 watts. Wired remote bass level control included. Heavy duty aluminum alloy heat-sink for extreme heat dissipation.

Frequency Response: 10 - 2500 Hz. Signal to Noise Ratio: >90 dB. Variable low-pass filter: 30Hz - 250 Hz, 12 dB/octave. Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz. 8 gauge power and ground wiring is recommended for installation. Dimensions: Length: 16"x Depth: 5.75" x Height: 2.37. Hifonics A3000.1D ownerâs manual. Power Specifications - Full Range Channels. THD at Rated RMS Power.

What is in the box? Amplifier Wired gain knob (wire attached) Allen wrench. Give Your Amplifier the Power It Deserves. 200 Amp Direct Upgrade High Output Alternator for Your Car.

240 Amp Direct Upgrade High Output Alternator for Your Car. 300 Amp Direct Upgrade High Output Alternator for Your Car. 375 Amp Direct Upgrade High Output Alternator for Your Car.

Black Handle Stainless Steel Utility Knife. NVX Black Handle Stainless Steel Utility Knife. Adding an Amp to Your Factory Stereo? 31-Band DSP that Retains Factory Features and Integrates Your New Amp with a Simple Plug-n-Play Harness. Get the wires you need to properly install and power your car amp.

Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects. 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects. 8 Gauge Premium (CCA) Copper Clad Aluminum Amplifier Power Wiring Kit with Speaker Wire. 8 Gauge Power Amplifier Installation Kit. 8 Gauge Amplifier Power Installation Kit.

Want to integrate this amplifier into your vehicle, but you don't want to remove the factory stereo? An LOC (Line Out Converter) will help you do exactly that! Keep the factory look and still get the performance you are looking for. 2 Channel Line Out Converter with xBOOST.

NVX XLOC22X 2-Channel High Voltage Active Line Output Converter with Impedance Matching and Remote Level Control. The XLOC22X helps you easily integrate with your factory or aftermarket stereo system. Looking to fine tune the bass in your vehicle?

If you want the best bass possible and a way to measure how loud your system is playing. Maximize Your Bass Potential with an Audio Controlâs legendary Bass Restoration Processor. You will need a good set of RCA interconnect cables to connect your amplifier to your head unit. Using high quality cables ensure the best sound possible by reducing unwanted noise interference, providing tight contacts, and utilizing the latest in cable technology. X Series RCA Interconnect Cable. Of 2-Channel Interconnects with Super Quad Construction & Rhodium-Plated Connectors. Improve the sound quality by delivering more power when replacing your factory wiring. High quality speaker will maximize your amplifier investment and system performance.

NVX XWS1225 12 AWG Speaker Wire. Of True 12 Gauge 100% Copper EnvyFlex Speaker Cable/Wire. 12 Gauge 7 Meter (23 Ft) Speaker Wire (CCA). Get the kit you need to upgrade your factory battery ground wire, alternator ground wire and alternator power wire. NVX XBG3PK 1/0 Gauge OFC Big 3 Upgrade Kit.

Comes with everything you need to upgrade your power and ground wire. Belva BBG3KT CCA 1/0 Gauge Big Three Kit.

Features everything needed to upgrade factory power and ground wire. 12V High Performance AGM Power Cell Battery for Systems Up To 2000 Watts.

200 Amp Relay Isolator (BIR200). Great for isolating a second batter making it dedicated to the stereo system. 500 Amp Relay Isolator (BIR500). Does not create a voltage drop to the second battery like conventional isolators. 80 Amp Relay Isolator (BIR80).

80 Amp Smart Relay Isolator (XSBI80). Smart isolator - Monitors and auto-charging feature!

200 Amp Smart Relay Isolator (XSBI200). 500 Amp Smart Relay Isolator (XSBI500).

Capacitors store energy for the amplifier to use on demand, thereby assisting in the elimination of dimming lights during peak power surges during use. 2.0 Farad Capacitor with Digital Red Display. Belva Nine Function Digital Multimeter. Perfect for any installation and troubleshooting. Impedance Meter / Signal Generator.

Set your gains like a Pro, accurately and quickly. This is a must have! Set your crossover frequency like a Pro. Accepts 4 gauge or 8-gauge wire.

High Quality Element Resistant AGU Fuse Holder. Belva BAGUH2 AGU Fuse Holder. 4/8 Gauge Mini ANL (MANL, AFS) Fuse Holder. 4/8 Gauge AGU Fuse Holder. 4/8 Gauge Mini-ANL/MANL/AFS Fuse Holder.

Modular Linkable ANL Fuse Block. 4 Pack of 80 Amp Nickel-Plated MANL Fuse. Mini-ANL (MANL/AFS) 80A Nickel Plated Fuses. 4 Pack of 100 Amp Nickel-Plated MANL Fuse.

Mini-ANL (MANL/AFS) 100A Nickel Plated Fuses. 4 Pack of 150 Amp Nickel-Plated MANL Fuse. Mini-ANL (MANL/AFS) 150A Nickel Plated Fuses. 2 Pack of 100 Amp Nickel-Plated ANL Fuse. ANL 100A Nickel plated for better power transfer.

2 Pack of 200 Amp Nickel-Plated ANL Fuse. High quality 200 Amp ANL Fuses. 2 Pack of 300 Amp Nickel-Plated ANL Fuse. High quality 300 Amp ANL Fuses. Pair of 8 Gauge Spade Terminals, #8 Opening.

Spade Terminals ⢠8 Gauge ⢠1 Red & 1 Black ⢠Nickel Plated. 8 Gauge Ring Terminals, 5/16 Opening. Nickel Plated Brass - 5 Pieces (3 Red & 2 Black). Stacking Hardware & Strapping Accessories. Use this stacking hardware to mount multiple amplifiers together for a clean, professional installation. Maximize your output with these accessories to strap your amplifiers together. 0.25 Meter (0.86 ft) Hyper-Flex RCA cable w/ Serpentine-Cut Nickel Plated Connectors. Policies for US and Canadian Customers. Return for replacement within: 30 days. Defective Merchandise Merchandise that is discovered to be defective upon receipt will be replaced.

Damaged Merchandise All packages are inspected for damage prior to leaving our warehouse. Damaged merchandise can be replaced with the same model only. Replacement Terms We will send a product replacement for an authorized return following the completion of receiving and inspection at our facility. You will be required to complete our product return form which will also provide helpful instructions for your return.

Battery, charger, cords, straps, etc. We will not process the return if any of these conditions are not followed. Any product without a valid, readable serial number, including but not limited to products with missing, damaged, altered, or otherwise unreadable serial number. Any product from which the UPC code has been removed from its packaging. Any product that exhibits physical damage or abuse.

Products that are not eligible for return for any of the above reason(s) will be sent back to you at your cost and expense. Prices, specifications, and images are subject to change without notice.